Circuit Breaker (Hose cut-off machine)-Replace

TM 55-4920-433-13&P

3-19. Circuit Breaker (Hose cut-off machine)-Replace

3-19

This task covers: Inspection of the circuit breaker

INITIAL SETUP

Tools:

Tool Kit, Electrical Repairer, Army

Personnel Required:

68F Aircraft Electrician

Reference Information:

TM 55-1500-204-25/1

REPLACEMENT

WARNING

HIGH VOLTAGE exists in the electrical system of this shop. All electrical inspections, repairs or

replacements shall be performed with the power OFF and only by qualified electricians. Serious

shock hazards exist which could result in serious injury or death to personnel.

NOTE

This circuit breaker is unique in the Pneudraulic Shop and controls power to the hose cut-off

machine. The following procedures apply only to this circuit breaker.

1. To remove defective circuit breaker.

a. Make sure MAIN circuit breaker is in the

OFF position.

b. Disconnect power cable (1) from P1 recep-

tacle at power entry panel (2).

GO TO NEXT PAGE

3-25