DISASSEMBLY - TM-55-4920-426-13-P0301

TM 55-4920-426-13&P

STARTER -- REPAIR -- Continued

4-18

1. DISASSEMBLY

Loosen screw on cover band and remove cover band.

Remove four screws from commutator end head assembly and remove head assembly.

Clean all metal parts in cleaning solvent and dry thoroughly.

Clean frame with a clean cloth dampened with cleaning solvent and dry thoroughly with compressed

air,

Clean brushholder and spring with a brush and cleaning solvent. Dry thoroughly with compressed

air.

Clean brushes with a clean dry cloth, only. Do no permit cleaning solvent to come in contact with

brushes.

Replace brushes if less then inch long.

2. ASSEMBLY

Install the commutator end head assembly and secure with four screws.

Install cover band.

END OF TASK

4-19

CYLINDER HEAD REMOVE

4-19

This task covers:

Removal

INITIAL SETUP

Personnel Required

Tools

63B Wheel Vehicle Mechanic

GO TO NEXT PAGE

4-19