BRAKE FAILS TO HOLD TEST STAND IN SET POSITION.

TM 55-4920-426-13&P

Section IV. TROUBLESHOOTING - Continued

TROUBLESHOOTING CHART - Continued

3-8

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

CHASSIS D5-D HYDRAULIC TEST STAND (cont)

6. BRAKE FAILS TO HOLD TEST STAND IN SET POSITION.

Check for brake adjustment.

Step 1.

Adjust brake, tighten brake rod knurled knob on brake handle.

Inspect brake lining.

Step 2.

Replace if lining is worn to a thickness of 1/32 inch or less (Para. 3-44).

3-25