Appendix E. C-141 Ramp Shoring Kit Instructions

TM 55-2350-252-14

APPENDIX E

Start the bevel cut for the top board at the 7' mark.

Nail the top board to the bottom board using 6 each 10 penny nails.

TOP BOARD DIMENSIONS: 2" THICKX 1l" WX 14" L.

BOTTOM BOARD DIMENSIONS: 2" THICKX 11"WX20'`L.

ALL DIMENSIONS ARE FOR COMMERCIAL GRADE LUMBER.

PAINT THE TOP AND BOTTOM OF EACH BOARD WITH A NON-SKID PAINT.

PAINT THE LAYER OF PEDESTAL SHORING DIRECTLY UNDER THESE

TWO BOARDS WITH A NON-SKID PAINT.

THE SUGGESTED PAINT IS: ``Walk Way Compound, "Common Non-Skid, Black,

E-1