Installation. - TM-55-1930-208-240132

TM 55-1930-208-24

f. Installation.

(1) Refer to figure 3-57 and apply a light coat of engine oil (item 8, Appendix C) to valve (24) and install in adapter

(18).

(2) Install spring (23), flat washer (22), and plug (21).

(3) Install new gaskets (20 and 19) and adapter (18) and secure with three lockwashers (17), three screws (16), three

flat washers (15), bolt (14), and two screws (13).

(4) Install drain cock (12) in adapter (3).

(5) Install plugs (11 and 10) in connector (9).

(6) Install connector (9) on adapter (3) and secure with two lockwashers (8) and two screws (7).

(7) Install gasket (6), core assembly (5), gasket (4), adapter (3), and secure with six lockwashers (2) and six bolts

(1).

(8) Install upper and lower hoses and tighten clamps.

3-95