|
|
TM 55-1915-200-10
e. Release brakes (11).
j. Pay out anchor and wire rope to desired length
by holding control valve handle (13) in DOWN.
f. Haul in wire rope by jogging control valve (13)
UP.
k. Stop payout by bringing control valve handle
(13) to NEUTRAL.
g. Reset brakes (11).
h. Detach anchor holdback wire rope (24, Sheet 3
CAUTION
of 4).
Never engage dog while spool is
i. Disengage and lock clutch (19, Sheet 2 of 4).
moving. Engaging dog with spool
moving will destroy winch.
CAUTION
Never release brakes completely.
l. Engage main spool dog (14).
Maintain "drag" on brakes to prevent
runaway of spool which could
m. Engage brakes (11).
damage winch.
n. Conduct post-operation check of controls as
prescribed in paragraph 2-7.10.3.5.
j. Release brakes (11, Sheet 1 of 4) and allow
main spool to freewheel.
2-7.10.3.3. Lowering Anchor by Releasing Brakes.
k. Control speed of anchor descent by varying
pressure with brake (11).
l. Stop anchor descent by fuly engaging brake
a. Conduct pre-operation check prescribed in
(11).
paragraph 2-7.10.3.1.
CAUTION
WARNING
Never engage dog while spool is
Before
operating
winch,
clear
moving. Engaging dog while spool
personnel and foreign objects from
is moving will destroy winch.
spools, wire rope, clutches and
related components. Moving winch
parts can cause serious injury or
m. Engage main spool dog (14).
death.
n. Engage brakes (11).
o. Conduct post-operation check of controls as
b. Engage hydraulic brakes (11, Sheet 1 of 4).
prescribed in paragraph 2-7.10.3.5.
c. Engage and lock main spool clutch (19, Sheet 2
of 4).
2-7.10.3.4. Raising Anchor. (FIGURE 2-236)
d. Disengage main spool dog (14, Sheet 1 of 4).
a. Conduct pre-operation check
of
controls
CAUTION
prescribed in paragraph 2-7.10.3.1.
Never release brakes completely.
Maintain "drag" on brakes to prevent
runaway of spool which could
damage winch.
2-617
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |