|
|
TM 55-1915-200-10
m. Disconnect main ramp cable (3, FIGURE 2-237)
c. Engage main spool dog (14) and lock.
from ramp.
(1) Hold and secure cable to handrail with
NOTE
wire.
It may be necessary to jog spool to
(2) Remove cotter pin (1).
engage dog.
(3) Loosen ratchet dogs (1, FIGURE 2-236,
Sheet 4 of 4) and disconnect from ramp (2) by removing
shackles.
d. Disengage main spool clutch (19) and lock.
n. Lower ramp to desired level by moving control
e. Engage auxiliary spool clutch (16) and lock.
lever (13, Sheet 1 of 4) down.
f. Disengage auxiliary spool dog (17).
NOTE
Failsafe brake is disengaged by
NOTE
hydraulic pressure when control
It may be necessary to jog the spool
lever is moved from neutral position.
to engage dog.
Brake is re-applied when control
lever is returned to neutral.
g. Move control lever (13) down to pay out
2-7.10.2. Raising Ramp. (FIGURE 2-242)
sufficient auxiliary cable for connecting to ramp.
h. Rig the auxiliary cable pulley (4, FIGURE 2-237)
CAUTION
to the padeye (5) at the center of ramp.
Station two observers forward of the
stern ramp on the main deck to
i. Move control lever (13, FIGURE 2-236, Sheet 1
observe proper operation of ramp,
of 4) up to take up slack in cable.
and to prevent safety chains from
j. Hook the stern ramp ladder (3, Sheet 4 of 4) to
fouling the ramp.
the mezzanine deck port side.
k. Disconnect main ramp cable (3, FIGURE 2-237)
a. Press START button (8, Sheet 1 of 4) to turn
from ramp:
power on.
b. Disengage auxiliary spool locking dog (17,
(1) Hold and secure cable (3) to handrail with
Sheet 2 of 4).
wire.
NOTE
(2) Remove cotter pin (1).
It may be necessary to jog the spool
(3) Loosen ratchet dogs (1, FIGURE 2-236,
to engage dog.
Sheet 4 of 4) and disconnect from ramp by removing
shackles.
c. Raise ramp by moving control lever (13, Sheet
1 of 4) towards the bow.
l. Move ladder (3) to starboard side.
2-611
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |