Firemain From Shore Connection.

TM 55-1915-200-10

d. Open inline stop valve to main deck hose

(3) Remove wires (4, 6, 8) from terminals (3, 5, 8).

connection (6, starboard; or 7, port).

(4) Pull cables (10) from terminal box.

e. Turn fire/bilge OFF/ON switch on Engine Room

(5) Install pipe plug (9).

Motor Control Center (1, FIGURE 2-206) to the OFF

position.

(6) Close terminal cover (1) and tighten bolts (11).

f. Close discharge valve to firemain (1, FIGURE

NOTE

2-204).

Direct attention to power cable haul in. If a

g. Close fire/bilge pump discharge valve (2).

sufficient amount of cable remains on the reel,

h. Close fire/bilge pump seawater suction valve

the preventer line can be removed to facilitate

(3).

reeling operation.

i. Close fire/bilge pump suction valve (4).

CAUTION

2-5.32.4. Firemain From Shore Disconnect.

Ensure that cable does not enter water.

a. Open fire/bilge pump suction valve (4, FIGURE

c. Coordinate cable reel-in between onboard and

2-204).

dockside crew. Stop-off one end of heaving line to

cable end at dockside.

b. Open fire/bilge pump sea water suction valve

(3).

d. Operate reel assembly wheel (4, FIGURE 2-

201) to haul-in power cable. Position cable (3, FIGURE

c. Open fire/bilge pump discharge valve (2).

2-202) on roller guide (2) while cable haul-in is in

progress. Ensure that power cable is not twisted,

d. Open discharge valve to firemain (1).

kinked, or misaligned as cable is being repositioned onto

e. Turn fire/bilge OFF/ON switch on Engine Room

reel.

Motor Control Center (FIGURE 2-206) to ON position.

e. Secure ends of cable (3, FIGURE 2-201)

f. Close inline stop valve to main deck hose

connections with waterproof wrappings.

connection (6, starboard; 7, port, FIGURE 2-204).

2-5.32.3. Firemain From Shore Connection.

g. Turn shore firemain water OFF.

(FIGURE 2-204)

h. Disconnect shore firemain hose at Main Deck

a. Attach shore firemain hose at Main Deck

International firemain hose connection (1, FIGURE 2-

International firemain hose connection (FIGURE 2-205).

205).

b. Turn shore firemain water on.

c. Open firemain hose connection cutout valve (5,

starboard; or 8, port).

2-537