|
|
TM 55-1915-200-10
2-5.29.11.3. Prime Replacement Soap.
CAUTION
a. Place tube in bottle of soap.
Do not feed china, metal, rags, clam shells,
or similar material into the disposer.
b. Turn ON/FILL,
OFF/DRAIN
switch
(6)
to
ON/FILL position.
Do not put grease or oil in the disposer.
Grease or oil can clog the drain.
c. Close and latch door.
d. Turn the priming switch (7) to prime position and
NOTE
hold for 20-30 seconds. This fills the detergent tubing.
Always allow the disposer and motor to run for a
short period after grinding is completed to
2-5.29.12. Foodwaste Disposer #FD2/502-E-4.
assure proper flushing of the disposer and
waste line.
2-5.29.12.1. Pre-operational Check.
d. Turn lever off.
WARNING
e. Turn OFF circuit breaker (8, FIGURE 2-101,
Never use your hand to check rotation of the
Sheet 14 of 21) on power distribution panel 7A.
flywheel or to remove foreign matter from
the disposer.
2-5.29.13. Waste Compactor #GTC-1. (FIGURE 2-191)
Never check rotation of flywheel or remove
foreign matter from disposer with power
2-5.29.13.1. Loading Compactor.
applied.
a. Turn ON circuit breaker (13, FIGURE 2-101,
a. Turn the flywheel to check for free rotation.
Sheet 14 of 21) on power distribution panel 7B.
b. Using tongs or pliers, remove any foreign matter
CAUTION
in the disposer.
Do not compact aerosol cans or any other
2-5.29.12.2. Disposer Operation.
containers holding, or which held, toxic
chemicals,
insecticides,
or
combustible
a. Turn ON circuit breaker (8, FIGURE 2-101,
contents. Fumes may be released that are
Sheet 14 of 21) on power distribution panel 7A.
hazardous to health or a fire or explosion may
b. Start disposer with the controller (FIGURE 2-
result.
190) before feeding food waste and check to be sure
water is flowing into the disposer.
2-5.29.13.2. Starting Compactor.
c. Feed food waste into the disposer.
a. Turn the OFF/ON START switch (2, FIGURE 2-
191) to the START position.
2-513
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |