|
|
TM 55-1905-223-24-7
g. Remove nonmetallic hose (10) from pressure vessel assembly by loosening hose clamp at that end.
h. Remove four machine screws (12), flat washers (13), lockwashers (14), and plain hexagon nuts (15) securing
brine manifold (4) to main frame assembly and remove brine manifold to work bench.
i.
Loosen hose clamp (1) and remove nonmetallic hose (24) and hose clamp (1) from elbow hose adapter (25).
j.
Remove elbow hose adapter (25) from brine manifold (4).
k.
Loosen hose clamp (3) and remove nonmetallic hose (2) and hose clamp (3) from elbow hose adapter (23).
l.
Remove elbow hose adapter (23) from brine manifold (4).
m. Loosen hose clamp (5) and remove nonmetallic hose (22) and hose clamp (5) from check valve (21).
n. Remove check valve (21) from brine manifold (4).
0. Loosen hose clamp (6) and remove nonmetallic hose (20) and hose clamp (6) from check valve (19).
p. Remove check valve (19) from brine manifold (4).
q. Remove hose plug (7) from brine manifold (4).
r.
Loosen hose clamp (8) and remove nonmetallic hose (18) and hose clamp (8) from hose adapter (17).
s.
Remove hose adapter (17) from brine manifold (4).
t.
Loosen hose clamp (9) and remove nonmetallic hose (10) and hose clamp (9) from elbow hose adapter (16).
u. Remove elbow hose adapter (16) from brine manifold (4).
v.
Remove salinity probe (11) from brine manifold (4).
REPAIR
a. Inspect nonmetallic hoses (2, 10, 18, 20, 22, 2, and 24) for cracks, cuts or swelling. Replace if cracked, cut or
swollen with new ones.
b. Inspect check valves (19 and 21) for corrosion damage, grime or grease buildup. Replace corrosion damaged
check valves with new ones. Clean grime or grease coated check valves with scrub brush and nonchlorinated
product water. Rinse with nonchlorinated product water.
c.
Inspect salinity probe (11) probes for corrosion damage. If damaged, replace salinity probe (11) with new one.
Clean probes with clean product water.
3-16
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |