 |
|||
|
|
|||
|
Page Title:
Replace/Repair Brine Flowmeter Assembly. (FIGURE 2-26) |
|
||
| ||||||||||
|
|
 TM 55-1905-223-24-7
2-25. Replace/Repair Brine Flowmeter Assembly. (FIGURE 2-26)
This task covers: a. Removal, b. Repair, c. Replacement.
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's,
Watermaker assembly shut down and tagged
"Out of Service - Do Not Operate."
Refer to TM 55-1905-223-10.
Materials/Parts
Dash panel assembly removed.
Refer to paragraph 2-22.
Brine flowmeter assembly
Brine flowmeter assembly removed.
P/N 7386
Refer to paragraph 2-22.
Teflon Tape, Item 1, Appendix C
Nonmetallic hose P/N PVTBF050
Nonmetallic hose P/N PVTBF075
Warning tag, Item 11, Appendix C
REMOVAL
a. Remove three hose clamps (1).
b. Remove three nonmetallic hoses (2 and 6).
c.
Remove two machine screws (4) securing meter holders (11) to float type flow rate indicating meter (5).
d. Remove hose elbow adapters (8, 10 and 3) from hose nipples (7).
e. Remove hose nipples (7) from float type flow rate indicating meter (5).
f.
Remove hose tee (9) from hose nipple (7).
REPAIR
a. Check nonmetallic hoses (2 and 6) for cracks or swelling. Discard if cracked or swollen.
b. Check hose elbow adapters (8, 10 and 3), hose nipples (7), and hose tee (9) for cracks or swelling. Discard if cracked
or swollen.
c.
Check float type flow rate indicating meter (5) for breakage. If broken, discard.
2-84
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals