REPLACEMENT - TM-55-1905-223-24-70056

TM 55-1905-223-24-7

d. Unscrew counterclockwise and remove hose tee (8) from hose nipple (6).

e. Unscrew counterclockwise and remove hose plugs (7) from hose tee (8).

f. Remove hose tee (12) and hose nipple (9) from bottom of separator housing (16).

g. Remove hose adapter (13) from hose tee (12).

h. Inspect all parts for cuts, breakage, or distorted threads. Replace damaged parts with new ones.

i. Seal all component threads with teflon tape.

j. Place hose adapter (13) into hose tee (12) and secure.

k. Place hose nipple (9) and hose tee (12) into bottom of separator housing and secure.

l. Place hose plugs (7) into hose tee (8) and secure.

m. Secure hose 'nipple (6) into hose tee (8).

n. Place hose nipple (6) with hose tee (8) attached into separator housing (16).

o. Insert new preformed packing (17) in separator housing (16).

p. Insert separator lid (2) into separator housing and secure.

q. Insert elbow adapters (3 and 20) into separator lid (2) and secure.

REPLACEMENT

a. Position air/oil separator assembly in desalinator, aligning holes on separator lid (2) with holes on mounting

bracket in desalinator.

b. Secure air/oil separator assembly to mounting bracket with four machine screws (1).

c. Connect outlet nonmetallic hoses (11 and 14) to hose tee (12) and secure with hose clamps (10 and 15).

d. Connect air bleedoff nonmetallic hose (18) to elbow hose adapter (20) and secure with hose clamp (19).

e. Connect inlet nonmetallic hose (18) to elbow hose adapter (20) and secure with hose clamp (19).

f. Open appropriate inlet feedwater gate valve (2, FIGURE 2-5, Sheet 1) for unit.

g. Start up desalinator. Refer to TM 55-1905-223-10.

2-32