REPLACEMENT - TM-55-1905-223-24-40130

TM 55-1905-223-24-4

Disconnect the exhaust connection from the exhaust outlet.

g. Remove the anchor bolts (1), lockwashers (2), and nuts (3) which secure the base to the deck.

h. Slide two lifting bars into the base rail holes and connect to a lifting fixture.

CAUTION

Do not lift the generator set using only the engine or generator lifting eyes.

NOTE

The generator set weighs approximately 1514 lbs.

Lift the generator set up and out of position.

Reference Chapter 2, Section VI, preparation for storage.

REPLACEMENT

a. Attach lifting fixture to-generator set.

b. Lift the generator set and move into position.

When properly positioned, lower the generator set down.

d. Install anchor bolts (1), lockwashers (2), and nuts (3) to rail securing generator set to the deck and torque to 20

ft-lbs.

e. Connect the exhaust connection to the exhaust outlet.

Connect all external wiring as tagged.

g. Supply 10 quarts of SAE 30W lubricating oil into the oil fill location.

h. Put coolant in the radiator; 50% water and 50% antifreeze.

Connect the fuel supply line to the fuel inlet connection.

Open the shut off valves to the fuel supply.

Connect the starter to the battery.

Before start-up of unit reference the PMCS tables.

3-7