Deprocessing Unpacked Equipment. - TM-55-1905-223-24-40125

TM 55-1905-223-24-4

3-5. Deprocessing Unpacked Equipment.

a. Remove protective caps, plugs, inserts, wrappings, and tape when inspection/inventory is completed. Inspect

piping openings for, damage. Wipe off dirt, grease, or protective films at time of installation.

b. Remove chocks from resilient mounted components.

3-6. Operational Procedures.

a. Initial Setup Procedure. Includes operational checks and inspections that are not performed for a routine startup.

Direct support maintenance personnel will perform initial setup in accordance with the operator's manual, TM 55-1905-

223-10.

b. Normal Startup. Refer to the operator's manual, TM 55-1905-223-10.

Shutdown Procedure (Usual or Unusual). Refer to the operator's manual, TM 55-1905-223-10.

Section III. INTERMEDIATE DIRECT SUPPORT PREVENTIVE MAINTENANCE

CHECKS AND SERVICES (PMCS)

There is no PMCS at the Intermediate Direct Support level. See Chapter 2, Section III.

Section IV. INTERMEDIATE DIRECT SUPPORT TROUBLESHOOTING

3-7. Troubleshooting. Both a symptom index and a troubleshooting table are provided. The symptom index will help

you locate the information you need for troubleshooting.

SYMPTOM INDEX

Troubleshooting

Procedure

ENGINE

Low oil pressure

Item 1

Will not shutdown

Item 2

3-2