 |
|||
|
|
|||
|
Page Title:
Wheel Mount Shock-Absorbing Spring Assembly. |
|
||
| ||||||||||
|
|
 TM 55-1740-202-13&P
(1) Remove cotter pin (2, fig. 4-9) and unscrew nut (3) from the left-hand tie rod end (4) associated with the
wheel mount shock-absorbing spring assembly being removed. Use a suitable spreader tool to disengage
tie rod end from wheel mount assembly.
(2) Remove cotter pin (2) and unscrew nut (3) from the right-hand tie rod end (6) to be removed. Use a
suitable spreader tool to disengage tie rod end from steering center arm (12).
(3) Disconnect flexible hose (18) from frame tee (19). Remove hex head screw (9) and lockwasher (10) from
center arm pin (11). Slowly disengage center arm pin (11) and steering center arm (12).
(4) Remove hex nut (13), lockwasher (14), and hex head screw (15) and disengage left or right-hand wheel
mount shock-absorbing spring assemblies (16 or 17) from wheel suspension frame (20).
j. Wheel Mount Shock-Absorbing Spring Assembly.
(1) If necessary, remove wheel, hub and drum, hydraulic brake backing plate, and tie rod end. Remove wheel
mount shock-absorbing spring assembly from front axle assembly.
Legend for fig. 4-10.:
1.
Grease fitting
8.
Dust cover
2.
Screw
9.
Spring support assembly
3.
Lockwasher
10.
Washer
4.
Cap
11.
Spring guide
5.
Capscrew
12.
Knuckle
6.
Kingpin
13.
Bracket
7.
Spring
4-18
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals