Rear Axle Assembly. - TM-55-1740-202-13-P0039

TM 55-1740-202-13&P

d. Rear Axle Assembly.

(1) Remove hex head screws (2, fig 4-4), lockwashers (3), hex nuts (4) and banjo suspension spring

assemblies (1).

(2) Remove cotter pins (6), flat washers (7), straight pins (8), and hydraulic jack (9).

(3) Remove cotter hairpins (10), lockout strut pins (11), cotter pins (6), .flat washers (7), straight pins (8), and

lockout struts (12).

(4) Remove remaining cotter pins (6), remaining flat washers (7), straight pins (13), and transporter

suspension frame.

Legend for fig. 4-4:

1. Banjo suspension spring

Straight pin

assembly

Hydraulic jack

2. Hex head screw

10.

Cotter hairpin

3. Lockwasher

11.

Lockout strut pin

4. Hex nut

12.

Lockout strut

5. Wheel suspension frame

13.

Straight pin

6. Cotter pin

7. Flat washer

e. Banjo Suspension Spring Assembly.

(1) Remove cotter pin (1. fig. 4-5) and nut (2).

(2) Remove seal washer (3) and front bearing assembly (4).

(3) Slowly remove front plate assembly (6).

(4) Remove seven springs (7).

(5) Remove felt washer (8), O-ring (9), and thrust bearing (10).

4-8