 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 55-1730-229-24P
AG 320A0-IPB-000
TO 35C2-3-473-4
TM 1730-24P/3
Codes for manufacturer are listed, the
The replacement factors used in initial
first listing refers to the Department
stockage computations should be revised,
of Defense Drawing Number, the second
if warranted, after significant usage is
listing refers to the actual part
experienced in accordance with the
manufacturer. Items that are included in
guidelines of MCO 4400.32A. The follow-
kits and sets are listed below the name
ing formula replacement factor, "X"
of the kit or set with the quantity of
represents actual usage experience (1
each item in the kit or set indicated in
year), "A" represents the application
the quantity incorporated in unit
per equipment, and "B" represents the
column.
number of equipments supported.
f. (ALL) Unit of Measure (U/M).
W=
X
Indicates the standard of the basic
AxB
quantity of the listed item as used in
performing the actual maintenance
(b) Initial allowances for
function. This measure is expressed by a
maintenance float items (recoverability
two-character alphabetical abbreviation
codes "R" and "D") for the FMF and
(e.g., ea, in, pr, etc.). When the unit
appropriate post and stations are as
of measure differs from the unit of
furnished by Initial Issue Actions.
issue, the lowest unit of issue that
will satisfy the required units of
Change to maintenance replacement rates
measure will be requisitioned.
resulting from actual usage may require
recomputation of maintenance float
allowances by holding units. Any
g. (ALL) Quantity Incorporated in
required recomputation of maintenance
Unit. Indicates the quantity of the
float allowances will be made in
item used in the assembly group. A "V"
accordance with MCO 4000.6.
appearing in this column in lieu of a
(c) The replacement factor for
quantity indicates that a definite
quantity cannot be indicated (e.g.,
same as (S/A) items is indicated upon
the first appearance of the item in the
shims, spacers, etc.).
major combination, component or assem-
bly.
h. (MC) Quantity Per Equipment
d. (ALL) National Stock Number
Indicates the consolidated quantity of a
(Column 4) indicates the National Stock
maintenance part used on an end item
Number assigned to the item and will be
upon the parts first appearance in this
used for requisitioning purposes.
publication.
e. (ALL) Description. Indicates the
Federal item name and any additional
4. Special Information.
descriptions of the item required. The
abbreviation "w/e" when used as part of
a. (ALL) Identification of the
the nomenclature, indicates that the
usable on codes of this publication are:
National Stock Number includes all
armament, equipment, accessories and
Used On
Code
repair parts issued with the item. A
A
0021
to 0097
part number or other reference number is
B
followed by the applicable five digit
0098
up
Federal Supply Code for manufacture. If
0021
to 0199
C
0200
up
two reference numbers and Federal Supply
D
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals