 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM55-1730-228-13&P
4-32. SCISSORS, SCISSORS ARM ROLLERS AND SHAFTS - REPAIR (Continued)
4-32
a. SCISSORS BUSHINGS:
(1) Disassembly:
(a) Remove affected scissors shaft(s). Refer to para 4-28.
(b) Using a hammer and soft drift, remove bushing(s) (1, Figure 4-40) from scissors frame (2) by tapping
evenly on the face of the bushing at points 90 from one another.
(2) Inspection:
(a) Clean all parts with cleaning solvent and dry with a lint-free cloth.
(b) Inspect shafts and bushings for evidence of wear, burrs, nicks, chips, scoring and other damage.
(c) Replace damaged parts with new parts.
(3) Assembly:
(a) Lubricate bushing bores in scissors frame.
(b) Drive-in bushing(s) (1) with soft drift until face of bushing is flush with scissors frame (2).
(c) Install scissors shafts. Refer to para 4-28.
(d) Install scissors assembly. Refer to para 4-28.
(e) Lubricate scissors assembly. Refer to para 3-6, Lubrication Instructions.
(f) Perform operational check for proper function.
GO ON TO NEXT PAGE
4-111
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals