Figure 4-33.2. Junction Box.

TM 55-1730-228-13&P

4-27. PLATFORM - REPLACE (Continued)

4-27

Figure 4-33.2. Junction Box.

(14) Connect terminals to wires and leads going to junction box.

(15) Connect the wires for the control box, bumper, platform light and limit switch cables at the junction box (2) using

the tags for identification.

NOTE

Refer to foldouts, Figure F0-3 for wire identification if tags are lost.

Figure 4-33.3. Platform Assembly.

(16) Position ladder (7, Figure 4-33.3) on platform (8) and secure with four capscrews (5), washers (6) and nuts (4).

GO ON TO NEXT PAGE

4-94