Figure 3-41. Hydraulic Pump (Sheet 2 of 2).

TM55-1730-228-13&P

3-39. HYDRAULIC PUMP - REPLACE (Continued)

3-39

Figure 3-41. Hydraulic Pump (Sheet 2 of 2).

b. INSTALLATION:

NOTE

Lubricate all new preformed packings with clean hydraulic oil before installation.

(1) Remove four shipping capscrews holding pump body together and install in old pump body.

(2) Place a new preformed packing (7) in position on the hydraulic pump.

(3) Place the hydraulic pump (6), with preformed packing, in position on the transmission.

(4) Install capscrews (5).

(5) Place a new preformed packing (3) in position on the hyd aulic manifold block (2).

(6) Place the hydraulic block (2) in position on the hydraulic pump.

(7) Install elbow fitting (8) in pump body (6) port (4).

(8) Install four socket head capscrews (1) through hydraulic manifold block (2) and into hydraulic pump body

(6).

GO ON TO NEXT PAGE

3-104