Figure 3-38. Stabilizer Cylinder (Sheet 2 of 2).

TM55-1730-228-13&P

3-36. STABALIZER CYLINDERS - REPLACE (Continued)

3-36

Figure 3-38. Stabilizer Cylinder (Sheet 2 of 2).

(4) Position valve body (6) close to cylinder (3). Install swivel elbow nut (4) on pipe assembly (5).

(5) Install hydraulic hose (1) on elbow (2).

(6) Start the SPEMS and operate the stabilizers several times.

(7) Check for leakage.

(8) With SPEMS OFF, check hydraulic reservoir level and add as needed. Refer to para 3-6, Lubrication.

(9) Perform operational check for proper function.

END OF TASK

3-94