SERVICE

TM 55-1730-228-13&P

3-27. HYDRAULIC MOTOR, BRAKE AND DRIVE HUB ASSEMBLY- SERVICE (Continued)

3-27

c. Disengage drive hub(s) (2). Refer to para 2-15.

d. Rotate wheel until the check/fill plug (3) is at 6 o'clock position.

e. Remove plug (3) and drain oil into drip pan.

f. Rotate wheel until check/fill plug hole is at either 3:00 or 9:00 o'clock position.

g. Fill to lip of hole with gear oil (GO-90).

h. Install check/fill plug (3) in fill hole.

i. Remove jack stands.

j. Lower SPEMS and remove jack.

k. Engage drive hub(s) (2). Refer to para 2-15.

l. Reinstall dust cover (1).

m. Perform operational check for proper function.

END OF TASK

3-65