|
|
TM 55-1730-228-13&P
c. To Operate The Stabilizers.
(1) Shift the STABILIZER mode switch into the operating position and hold.
(2) Smoothly and carefully move the control lever in the desired direction.
(a) Forward to extend (down) the stabilizers.
(b) Backward to retract (up) the stabilizers.
WARNING
Do not operate in LIFT mode unless the stabilizers are extended. Failure to do so may result in severe
personal injury.
NOTE
The stabilizers will stop automatically at the end of their travel.
NOTE
Do not drive the SPEMS unless the stabilizers are fully retracted (up).
d. To Lift or Lower The Platform.
WARNING
Do not operate in LIFT mode unless the stabilizers are extended. Failure to do so may result in severe
personal injury.
(1) Shift the LIFT mode switch into the operating position and hold.
(2) Smoothly and carefully move the control lever in the desired direction.
(a) Forward to raise the platform.
(b) Backward to lower the platform.
e. To Steer The SPEMS.
(1) Shift the DRIVE mode switch into the operating position and hold.
GO ON TO NEXT PAGE
2-18
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |