INSTALLATION - TM-55-1730-227-13-P0047

TM 55-1730-227-13&P

3 - 1 8 . Rail - Replace (Cont)

3-18

INSTALLATION

1. Place the rail on the pallet assembly. The rail stop assembly holes in the top

of the rail should be to the outside when placed on the pallet assembly.

2. There are two positions for mounting the rail on the pallet assembly. Aline the

holes in the bottom of the rail with the holes in the pallet assembly for the desired

mounting position.

Install four hex head screws through the rail into the pallet assembly.

Tighten nuts to a torque of

4. Place a flat washer and a lock nut on each screw.

276 in-lbs.

END OF TASK

3-19