SMOKE AND ILLUMINATION SIGNAL (cont)

TM 55-1680-349-10

WARNING

Use extreme care when using the signal as an illumination

device as hot molten residue dripping from the burning signal

can cause serious burns on the body.

When exerting pull on the pull ring do not use a twisting

motion as the pull tab may tear off resulting in a defective

signal

d. Make a steady, straight horizontal pull until the pull ring and

tab separate from the signal. Continue pulling upwards until a full

arm's length is reached and point the activated signal end upward

at a 45angle until the signal has burned out.

2-10