SYSTEM (LONG-TERM) POWER-DOWN PROCEDURE

TM 9-6920-737-10

SYSTEM (LONG-TERM POWER-DOWN PROCEDUR

This procedure describes how to perform a complete power-down of the U-COFT.

CAUTION

Equipment damage from freezing or overheating may result during periods of extreme weather conditions if the U-COFT

is completely powered-down without benefit of Administrative Storage precautions. Do not perform this procedure

without approval from organizational maintenance.

Notify organizational maintenance that the system is to be completely powered-down.

Make sure Electronic Equipment Power-Down Procedure has been performed (see 2-199).

1.2

In Computer Shelter, open the door of the Electronic Power Distribution Panel (A) and set the seven circuit

breakers (B) and main circuit breaker (C) to OFF.

NOTE

The Computer Shelter and Trainer Shelter Air Conditioners and overhead lighting will go off and the emergency lights will

light (battery operated) when step 2 is performed.

Open the door of Utility Power Distribution Panel (1) and set the ten circuit breakers (2) to OFF position.

Set main circuit breaker (3) to OFF position and close panel door.

Change 1 2-207