Section IV. MAINTENANCE OF THE TRIPOD MOUNT ASSEMBLY

TM 9-6920-361-13&P

Section IV. MAINTENANCE OF THE TRIPOD MOUNT ASSEMBLY

c. Repair. Refer to paragraph 6-3.

6-18. Disassembly. Disassemble the tripod mount

assembly as shown in figures 6-10 through 6-13.

6-20. Assembly. Assemble the tripod mount

assembly as shown in figures 6-10 through 6-13.

6-19. Cleaning, Inspection, and Repair.

a. Cleaning. Refer to paragraph 6-8.

b. Inspection. Refer to paragraphs 5-4 and 5-5.

DRILL 0.118 + 0.004 DIAMETER HOLES FOR SPRING

TIGHTEN REPLACEMENT SCREW (4) FINGER TIGHT

PINS (1) IN REPLACEMENT KEY (2). PINS MUST BE

WITH LEVER (1) IN THE 3 O'CLOCK POSITION, THEN

FLUSH WITH TOP OF KEY.

DRILL AND TAP HOLE FOR SETSCREW (3).

AR 902767

AR 902766

Legend

1. Spring Pin - 11578715

1. Locking Lever - 11578691

2. Key- 11578716

2. Spacer- 11578681

3. Retainer Screw - 11578717

3. Setscrew - 11578667

4. Retainer - 11578683

4. Locking Screw - 11578693

5. Locking Screw - 11578682

6. Tripod Base - 11578689

Figure 6-11. Disassembly/assembly of tripod

Figure 6-10. Replacement of tripod locking

base assembly

lever group

6-10