REASSEMBLY. - TM-9-6650-235-13-P0111

ARMY

TM 9-6650-235-13&P

MARINE CORPS

TM-08552A-13&P

REASSEMBLY.

If necessary, fabricate a new black wire (1), white

wire (2), or blue wire (3). See appendix E (figures

E-1, E-2, and E-5) for fabrication instructions.

Insert the wires into the three metallic tubes (4).

Install three metallic tubes (4) in the rear sleeve

assembly (5) according to the color code tags

attached during disassembly.

Install and tighten three setscrews (6).

NOTE

Locate the optical element erector lens cell

assembly (7) 16.050.032 inches from the rear of

This procedure pertains to the front

the rear sleeve assembly (5). See appendix G for

section of the borescope extension

converting decimal measurements into fractions.

tube.

Install and tighten three setscrews (8).

Slide the optical element erector lens cell assembly

(7) on the three metallic tubes (4) with the end

containing the lens facing the rear sleeve assembly

(5).

5-71