 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 ARMY
TM 9-6650-235-13&P
MARINE CORPS
TM-08552A-13&P
2
a. Push two conductor tubes (4) and metallic
support tube (5) into front sleeve assembly (6)
with about 1 1/4 inch of the metallic support tube
and conductor tubes protruding from the rear
side of the front sleeve assembly.
b. Insert three setscrews (7).
3
a. If necessary, fabricate new wires.
See appendix E (figures E-1 and E-5) for
fabrication
instructions.
b. Install black wire (8) and white wire (9) in the
conductor tubes (4) and push through until
approximately 1 inch protrudes from the end of
the conductor tubes.
c. Position sleeve assembly (10) with the notched
side between the white and black wires.
d. Push the wires through the holes in the sleeve
assembly (10).
e. Solder white wire (9) to terminal (11) and black
wire (8) to terminal (12) on the sleeve assembly
(10). See TM 9-254.
5-31
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals