Chapter 5. DIRECT SUPPORT MAINTENANCE INSTRUCTIONS

ARMY

TM 9-6650-235-13&P

MARINE CORPS

TM-08552A-13&P

CHAPTER 5

DIRECT SUPPORT MAINTENANCE INSTRUCTIONS

Section I. LUBRICATION INSTRUCTIONS

5-1. LUBRICATION.

Lubrication is not required or recommended.

Section II. REPAIR PARTS, SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT

5-2. COMMON TOOLS AND EQUIPMENT.

5-4. REPAIR PARTS.

For authorized common tools and equipment, refer to the

Modified Table of Organization and Equipment (MTOE)

Repair parts are listed and illustrated in appendix C of

applicable to your unit.

this manual.

5-3.

SPECIAL TOOLS, TMDE, AND SUPPORT

EQUIPMENT.

No special tools, TMDE, or support equipment is

required for the M3 Borescope.

Section III. SERVICE UPON RECEIPT

report the damage on SF 364, Report of Discrepancy

5-5. GENERAL.

(ROD).

This section contains instructions for services to be

b. Check the equipment against the packing slip to

performed by the using organization upon the receipt of a

see if the shipment is complete. Report all discrepancies

new or overhauled M3 Borescope. These services

in accordance with the instructions of DA PAM 738-750.

include unpacking, deprocessing, and checking the M3

Borescope and equipment.

5-7. SERVICE UPON RECEIPT OF MATERIEL.

5-6. CHECKING UNPACKED EQUIPMENT.

Table 5-1 contains instructions for performing those

services required upon the receipt of this equipment.

a. Inspect the equipment for damage incurred

during shipment. If the equipment has been damaged,

5-1