Blow turbo dry with compressed air.

TM 9- 2990- 205- 34&P

CLEANING THE TURBO BEFORE DISASSEMBLY - CONTINUED

0007 00

WARNING

Cleaning solvent is flammable! Use only in well ventilated areas. Keep away from flame,

sparks, or heat. Avoid contact with eyes, mouth, or skin. Wear rubber gloves to prevent skin

irritation.

CAUTION

Never use a wire brush or steel blade scraper.

3. Using bristle brush, plastic scraper, and solvent, remove dirt, oil, and any other contaminants from all exterior

surfaces.

4. Use cloth moistened with solvent to clean hard to reach areas.

WARNING

Line pressure for compressed air used for cleaning shall not exceed 30 psi. Wear appropriate

eye protection and gloves. Never direct the compressed air stream at another person.

5. Blow turbo dry with compressed air.

END OF WORK PACKAGE

0007 00- 2