Figure E-1. 200 AMP Generator Performance Curves

TM 9-2920-257-30&P

16. Add incremental loads up to 200 amps. Voltage should remain constant.

17. If 28 volts cannot be sustained at various settings, regulator is defective.

18. Reduce loads one at a time, until load is zero at completion of test.

19. Reduce test stand speed to 1000 RPM.

20. Press STOP button. Wait for test stand to come to a complete stop.

21. Return test stand switches and controls to base settings (para E-3).

22. Remove generator and regulator from test stand.

Figure E-1. 200 AMP Generator Performance Curves

Change 1 E-7/(E-8 Blank)