Cleaning Instructions for Components.

TM 9-2920-252-34&P

3-6. GENERAL CLEANING (CONT)

1. CLEANING (cont)

c. Using a bristle brush and solvent, remove dirt, oil,

and other contaminants from all exterior surfaces.

d. Use a clean rag moistened with solvent to clean

hard to reach areas.

WARNING

Compressed air used for cleaning

purposes will not exceed 30 psi. Use

only with effective chip guarding and

personal

protective

equipment

(goggles/shield, gloves, etc.).

e. Blow cleaned surfaces dry with compressed air.

f. Cleaning Instructions for Components.

(1) Attaching parts, removed shafts, adapter

plate, and other metallic parts may be

immersed in solvent, then scrubbed with a

brush or rag.

(2) Clean residue of sealing compound from

attaching hardware and from threads in

tapped holes (chase with correct size tap).

3-3