CLEANING-continued

TM 9-2920-252-34&P

1. CLEANING. (cont.)

NOTE

Maintain rigid cleaning standards.

Keep hands free of grease or oil which

would transfer dust and grit to cleaned

parts.

a. Using tape, seal oil inlet port (1) and oil discharge

port (2).

WARNING

Dry cleaning solvent P-D-680 is toxic

and flammable.

Wear protective

goggles and gloves and use only in a

well ventilated area. Avoid contact

with skin, eyes, and clothing and don't

breathe vapors. Do not use near open

flame or excessive heat. The flash

point is 100 138F (38-C 50C). If

you become dizzy while using

cleaning solvent, get fresh air

immediately and get medical aid. If

contact with eyes is made, wash your

eyes with water and get medical aid

immediately.

CAUTION

Do not immerse main body of generator or the oil

pump in solvent.

Do not use high pressure steam for cleaning.

Never use caustic solution, wire brush, or steel blade

scraper on exterior surface of generator.

b. Clean main body of generator and exterior of

pump assembly with a clean rag moistened in

cleaning solvent. Do not allow solvent to touch

seals,

wired

terminals,

insulation.

TA315006

3-2