 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 Seat brushes until satisfactory as shown
b.
Refer to figure 21 for instructions
in figure 39.
Pull the brushes out of
covering installation of the commutator
their holders.
Remove armature and dis-
end head assembly.
card sandpaper. Wipe armature and brush
with a clean, dry cloth.
c.
Position sandpaper on armature as
Insert armature and
shown in figure 37.
Rotate armature clock-
install brushes.
32. Armature
wise as shown in figure 38 to seat brushes.
Refer to figure 20 for instructions
a.
covering installation
of intermediate
bearing retainer assembly on the armature
b.
Refer to figure 19 for instructions
covering assembly of the positork drive
assembly.
Note. Before installing the positork
drive assembly, lubricate the splines of
the armature shaft and the groove in the
drive collar with grease, Specification
MIL-G-3278.
Rotating armature
to
Figure 37. Positioning
sandpaper
seat brushes.
on armature.
Examples of satisfactory and unsatisfactory brush seats.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals