Remove outer recessed washer

TM 9- 2920- 232- 34&P / TO 38X14- 2- 32

- -

DISASSEMBLY OF THE STARTER ASSEMBLY - CONTINUED

0008 00

n. Remove outer recessed washer (18), spring (19), inner recessed washer (20), bellows (21), and washer (22)

from plunger (23).

o. Inspect solenoid plunger compression spring for cracked or broken condition. Replace if defective. Replace

spring if dimensions do not conform to a free length of 2.586 inch and solid length of0.668 inch. Spring load at

1.56 inches compressed length must be 12.45 to 15.56 lb.

p. Inspect clutch shell for cracks. Replace if defective.

q. Inspect drive pinion for broken or worn teeth, nicks, and burs. Replace assembly if pinion is defective.

Hold drive pinion (24) and manually rotate clutch (10) in each direction. Rotation in a clockwise direction

should be smooth and rolls lockup as rotation is reversed should be positive. Replace assembly if clutch is

defective.

Inspect all drive splines in clutch and on sleeve for burs, and a cracked, chipped, or broken condition. Replace

assembly if splines are defective.

0008 00- 13