QUALITY OF MATERIAL

TM 9- 2920- 224- 34&P

GENERAL INFORMATION - CONTINUED

0001 00

In general, destruction of essential parts, followed by burning, will usually be sufficient to render equipment use-

less. Time is usually critical.

Material must be damaged so that it cannot be restored to usable condition by either repair or cannibalization. If

lack of time or personnel prevents destruction of all parts, give priority to destruction of parts hardest to replace. It

is important that the same parts be destroyed on all starters to prevent construction of one complete starter from

several damaged ones.

PREPARATION FOR STORAGE AND SHIPMENT

Refer to TM 9--2350--256--20 for instructions on preparation for storage and shipment.

QUALITY OF MATERIAL

Material used for replacement, repair, or modification must meet the requirements of this manual. If quality of ma-

terial requirements are not stated in this manual, the material must meet the requirements of the drawings, stan-

dards, specifications, or approved engineering change proposals applicable to the subject equipment.

END OF WORK PACKAGE

0001 00-014 bl-ank

00-3/ 00- 3