STARTER MOTOR LUBRICATION (Sheet 1 of 1)

TM 9-2835-255-34

S T A R T E R MOTOR LUBRICATION (Sheet 1 of 1)

APPLICABILITY: Starters M0017414MA, MB, and MC

TOOLS: Automotive fuel and electrical system repair tool kit (SC5180-95-CL-B08)

Hand oiler (Item 84, Appendix D)

SUPPLIES: Lubricating oil (Item 13, Appendix B)

Wiping rag (Item 14, Appendix B)

LUBRICATION:

1. REMOVE PLUB (1) FROM END HOUSING (2)

AND PLUG (3) RO SHIFT HOUSING

(4). LUBRICATE HOUSINGS (2,4).

a. Remove plug (1) from end housing

(2). Make sure wick (5) is in plug port (6).

b. Remove plug (3) from shift housing (4). Make

sure wick (7) is in plug port (8).

2. INSPECT PARTS FOR DAMAGE. REPLACE

AS REQUIRED.

3. ADD OIL TO WICKS (5,7) UNTIL SOAKED.

WIPE OFF EXTRA OIL.

4. INSTALL PLUGS (1,3).

End of Task

STARTER MOTOR END PLAY ADJUSTMENT (Sheet 1 of 2)

APPLICABILITY: Starters M0017414MA, MB, and MC

TOOLS: Automotive fuel and electrical system repair tool kit (SC 5180-95-CL-B08)

General mechanic's tool kit: automotive (SC 5180-90-N26)

Deep style socket, 1/4-inch drive, 1/4-inch (Item 77, Appendix D)

Extension, 1/4-inch drive, 6-inch (Item 80, Appendix D)

Power supply unit (Item 69, Appendix D)

SUPPLIES: Protective plug (Item 107, Appendix E)

Test setup (Figure 5, Appendix C)

Timing gage (Figure 4, Appendix C)

EQUIPMENT CONDITION: Starter motor tested (page 9-43)

Go on to Sheet 2

9-62

Change 2