INSTALL COVER - TM-9-2835-255-340775

TM 9-2835-255-34

STARTER MOTOR REPAIR (Sheet 11 of 11)

4. INSTALL EIGHT NEW BRUSHES (1) AND

FOUR NEW PLATES (2) ON FOUR

HOLDERS (3).

a. Install two screws (4), plate (2), and two

brushes (1) on holder (3).

NOTE

Put one brush (1) in holder (3) closest to ring (5)

before putting second brush (1) in housing (6)

b. Pull spring (7) up and install one brush

(1) in holder (3). Release spring (7) slowly

and put in second brush (1).

c. Repeat steps a and b for three remaining

pairs of brushes (1).

5. INSTALL COVER (8) AND NEW

GASKET (9).

a. Put cover (8) and gasket (9) over four

ring windows (10).

b. Install four nuts (11) to two T-screws (12).

6. LUBRICATE STARTER MOTOR

7. INSTALL SOLENOID SWITCH ASSEMBLY

8. TEST STARTER MOTOR (PAGE 9-43).

9-61