INSTALLATION - TM-9-2835-255-340740

TM 9-2835-255-34

S W I T C H REPLACEMENT (Sheet 2 of 2)

STARTER

MOTOR

SOLENOID

INSTALLATION:

1. INSTALL SWITCH (1).

NOTE

Make sure clamp (2) is centered over boot (3).

a. Put plunger assembly (4) in plunger (5).

Rock switch (1) until four switch

mounting holes (6) aline with housing

holes (7).

NOTE

Make sure that ridge of boot (3) is inside lever

housing (8) and that smooth end of boot (3) is around

plunger (5).

b. Put connector (9) on stud (10) and switch

terminal (11). Install four screws (12).

Tighten clamp (2).

c, Install two nuts (13) on stud (10) and

terminal (11).

d. Put lead (14) on switch terminal (15),

Install nut (16) and new lockwasher (17).

2. LUBRICATE STARTER MOTOR

3. TEST STARTER MOTOR (PAGE 9-22).

End of Task

9-26