 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2835-255-34
STARTER MOTOR REPAIR (Sheet 13 of 13)
11. PRESS FOUR BRUSHES (1) ALL THE
WAY IN HOLDERS (2) UNTIL EACH
SPRING (3) SNAPS INTO PLACE.
12. PUT END BELL (4) IN MOTOR (5) UNTIL
SECOND FOUR BRUSHES (1) ARE OVER
BAR RISERS (6). PRESS SECOND FOUR
BRUSHES (1) ALL THE WAY IN
HOLDERS (2) UNTIL EACH SPRING (3)
SNAPS INTO PLACE.
13. ALINE SCRIBE MARK (7) ON MOTOR (5)
WITH SCRIBE (8) ON END BELL (4) OR
WITH OIL PLUG (9) OF NEW END BELL
(4). PUSH END BELL (4) DOWN ON
MOTOR (5).
14. SECURE END BELL (4) TO MOTOR (5).
ATTACH TWO WINDING LEADS (10) TO
BRUSHES (1), AND INSTALL TWO PLUGS
(11) AND NEW GASKETS (12).
a. Install four screws (13) and new
lockwashers (14).
b. Install two screws (15) to hold leads (10)
to brushes (1).
c. Put two gaskets (12) on plugs (11). Install
plugs (11).
15. INSTALL LEAD (16).
a. Put lead (16) on stud (17).
b. Install nut (18) and new lockwasher (19).
c. Put other end of lead (16) on
terminal (20). Install screw (21).
16. ADJUST STARTER MOTOR END PLAY
17. LUBRICATE STARTER MOTOR
18. TEST STARTER MOTOR (PAGE 9-1).
End of Task
8-18
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals