 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 T M 9-2835-255-34
STARTER MOTOR REPAIR (Sheet 2 of 13)
DISASSEMBLY:
1.
SCRIBE A STRAIGHT LINE (1) FROM
COMMUTATOR END BELL (2) TO FIELD
WINDING FRAME (3) IN LINE WITH OIL
PLUG (4).
2. REMOVE ELECTRICAL LEAD (5), TWO
PLUGS (6), AND GASKETS (7).
a. Remove nut (8) and lockwasher (9). Lift
lead (5) from terminal stud (10).
b. Loosen screw (11) at side of solenoid
switch (12). Take lead (5) off switch (12).
c. Remove plugs (6). Remove gaskets (7).
3.
INSPECT PLUGS (6) FOR DAMAGE.
REPLACE AS REQUIRED.
4.
REMOVE END BELL (2) AND
PREFORMED PACKING (13).
a. Remove two screws (14) that hold field
winding leads (15) to brushes (16).
b. Remove four screws (17) and
lockwashers (18) from end bell (2).
c. Tap end bell (2). Pry end bell (2) off
frame (19).
d. Pull packing (13) off end bell (2).
Go on to Sheet 3
9-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals