CLEANING - TM-9-2835-255-340674

TM9-2835-255-34

ACCESSORY GEARBOX CLEANING AND REPAIR (Sheet 10 of 40)

CLEANING:

WARNING

1. CLEAN COVER (1).

Clean cover (1) with soft bristle brush and

cleaning solvent.

Dry with shop air.

2. CLEAN HOUSING (2).

Remove large amounts of dirt and oil from

housing (2) with rag.

Clean surface of housing with soft bristle

brush and cleaning solvent.

Dry with shop air.

CLEAN ALL GEAR ASSEMBLIES.

Clean all gear assemblies by dunking in

cleaning solvent two or three times. Allow

solvent to soak into bearings on both ends.

b. Allow gear assemblies to dry by evaporation

and coat immediately with clean lubricating

oil.

NOTE

If gears and bearings are not to be rein-

stalled within one hour, place lubricated

gears and bearings in plastic bags.

Go on to Sheet 11

7-55

Change 6