REMOVE ACCESS COVER - TM-9-2835-255-340660

TM9-2835-255-34

DIRECT LINEAR VALVE REPLACEMENT (Sheet 2 of 6)

REMOVE THREE SCREWS (I) AND

THREE WASHERS (2) THAT SECURE THE

DIRECT LINEAR VALVE (3) TO ELEC-

TROMECHANICAL FUEL SYSTEM (4).

REMOVE ACCESS COVER (5) AND

GASKET (6).

a. Cut safety wire and remove two screws (7)

and washers (8).

b. Remove four remaining screws (9),

washers (8), access cover (5) and gaskel

(9).

inspect electromechanical fuel system

cavity (10) for fuel. If fuel is present,

assemble electromechanical fuel system

using old parts and replace

electromechanical fuel system.

`5.i

REMOVE FOUR BOLTS (11) AND SEP-

ARATE CONNECTOR (12) FROM THE

FLANGE CONNECTOR ELBOW ( 13).

EXTRACT WIRES AND PINS (14,15) FROM

CONNECTOR (1 2).

a. Using a pin extractor and installation tool.

remove wires and pins C (red) (14) and

I) (blue) (15) from the backside of

connector (12).

Go on to Sheet 3

Change 4 7-41