ACCESSORY GEARBOX REMOVAL FROM AND INSTALLATION IN SHIPPING CONTAINER (Sheet 1 of 2)

TM 9-2835-255-34

ACCESSORY GEARBOX REMOVAL FROM AND INSTALLATION IN

SHIPPING CONTAINER (Sheet 1 of 2)

TOOLS: General mechanic's tool kit: automotive (SC 5180-90-CL-N26)

Deep style socket, l/2-inch drive, 3/4-inch (Item 43, Appendix D)

Torque wrench, 0 - 1 5 0 ft-lb (Item 24, Appendix D) --

S U P P L I E S : Self-locking nut (Item 40, Appendix E) (8 required)

Self-locking nut (Item 17, Appendix E) (6 required)

Wood block (Item 23, Appendix B) (2 required)

P E R S O N N E L : Two

EQUIPMENT CONDITION: Top weldment removed (page 4-1)

AGB module lifting sling installed (page 7-5)

REMOVAL:

1. REMOVE GEARBOX (1) FROM BOTTOM

WELDMENT (2).

a. Remove eight screws (3), self-locking nuts

(4), and washers (5).

b. Lift gearbox (1) straight up and out of

weldment (2). Set gearbox (1) on two

wood blocks (6).

2. REMOVE TWO BRACKETS (7).

Remove six self-locking nuts (8), washers

(9), and two brackets (7) from gearbox (1).

Go on to Sheet 2

7-18