REMOVE OIL FEED TUBE ASSEMBLY

TM 9-2835-255-34

GAS TURBINE POWER UNIT REPLACEMENT (Sheet 6 of 30)

9. REMOVE OIL FEED TUBE ASSEMBLY (1) GAS-

KET (2) METAL SEAL RING (3) AND PACKING MA-

TERIAL (4).

Cut safety wire and remove four outer bolts (5)

and washers (6).

Cut safety wire from two inner bolts (7). Using

box end of torque adapter (8) remove bolts

(7) and tube assembly (1).

Remove and discard gasket (2), metal seal

ring (3) and packing material (4).

NOTE

Replace hollow pin (9) only if damaged,

and set tube assembly (1) aside.

10. INSPECT PIN (9) FOR CRACKS, DEFORMATION

AND SCORING. REPLACE AS REQUIRED.

11. INSPECT PARTS FOR DAMAGE. REPLACE AS

REQUIRED.

Go on to Sheet 7

6-67

Change 6