 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2835-255-34
NO. 10 BEARING REPLACEMENT (Sheet 8 of 11)
11. REMOVE BEARING HOUSING (1)
a.
Using soft face mallet, gently tap up and
around outer edge of bearing housing (1) until
bearing housing (1) is free from bearing (2).
Remove bearing housing (1) and set aside for
later use.
12. REMOVE BEARING AND SPUR GEARSHAFT (3)
FROM TORQUE FIXTURE (4).
a.
Unscrew, but do not remove, three screws (5)
from torque fixture (4) using socket head
screw key. Remove bearing and spur gear-
shaft (3) from torque fixture (4).
WARNING
Use caution when using press. Improper
tools or tools not properly aligned may
cause injury to personnel or damage to
parts or equipment.
13. REMOVE BEARING (6) FROM SPUR GEAR-
SHAFT (7).
a.
Place bearing and spur gearshaft (3), bearing
3 PLACES
side down, on arbor press.
b.
Insert three pins (8) of bearing removal tool (9)
into three holes (10) of bearing and spur gear-
shaft (3).
LE55109
Go on to Sheet 7
6-57
Change 6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals