 |
|||
|
|
|||
|
Page Title:
INSTALL BEARING HOUSING, BEARING AND SPUR GEARSHAFT |
|
||
| ||||||||||
|
|
 TM 9-2835-255-34
NO. 10 BEARING REPLACEMENT (Sheet 5 of 11)
NOTE
If any of these conditions exist, reas-
semble reduction gearbox with original
components and replace reduction gear-
box (page 6-17).
6. INSTALL BEARING HOUSING, BEARING AND
SPUR GEARSHAFT (1) IN TORQUE FIXTURE (2).
a.
Secure torque fixture (2) to work surface. Un-
screw but do not remove three screws (3)
from torque fixture (2).
b.
Place bearing housing, bearing and spur
gearshaft (1) into torque fixture (2). Align three
holes (4) with three screws (3). Screw in and
tighten three screws (3).
7. UNCRIMP LOCKING CUP (5) USING SUITABLE
TOOL.
8.
REMOVE AND INSPECT PLAIN ROUND NUT (6).
a.
Using spanner wrench (7) and breaker bar,
remove plain round nut (6). Inspect plain
round nut (6) for cracks, worn lug slots, and
damaged internal threads. Replace plain
round nut (6) if damaged.
9. REMOVE AND DISCARD LOCKING CUP (5).
10. REMOVE RETAINING RING (6).
a.
Pry retaining ring (8) from groove (9). Discard
retaining ring (8).
LE55108
Go on to Sheet 6
6-56
Change 6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals