ENGINE/REAR MODULE LIFTING SLING INSTALLATION ON AND REMOVAL FROM REAR ENGINE SUBASSEMBLY (Sheet 1 of 1)

TM 9-2835-255-34

ENGINE/REAR MODULE LIFTING SLING INSTALLATION ON AND

REMOVAL FROM REAR ENGINE SUBASSEMBLY (Sheet 1 of 1)

TOOLS: Engine/rear module lifting sling (Item 32, Appendix D)

Hoist, 2-ton miniumum capacity (Item 36, Appendix D)

PERSONNEL: TW O

INSTALLATION:

INSTALL SLING (1).

a. Hook sling (1) to hoist hook (2). Place

sling (1) over rear engine (3).

b. Position bar (4) in two lifting plates (5).

Put two locking pins (6) in holes (7) of

bar (4).

c. Install link (8) in hole (9).

d. Remove pin (10) from shackle (11). Place

shackle (11) on ring (12). Install pin (10).

REMOVAL:

REMOVE SLING (l).

a. Lower hoist until cables of sling (1) are

slack.

Remove pin (10) from shackle (11). Take

shackle (11) off ring (12). Install pin (10)

in shackle (11).

Remove link (8).

Remove two pins (6) from bar (4). Remove

bar (4) from two plates (5).

Remove sling (1) from hoist hook (2) and

stow sling (l).

End of Task

6-23