INSTALL RING SPACER - TM-9-2835-255-340484

TM 9-2835-255-34

NO. 2 AND 3 BEARING SEAL/PACKING RETAINER REPLACEMENT (INCLUDING INTERSHAFT SEAL)

(Sheet 38 of 49)

19. INSTALL RING SPACER (1) INTO NO. 2 BEARING

HOUSING (2).

Align slot (3) of ring spacer (1) with spring pin

(4) in No. 2 bearing housing (2).

NOTE

Tang (5) of ring spacer (1) should be

aligned with slot (6) in bearing (7) outer

race.

Install ring spacer (1) into No. 2 bearing hous-

ing (2).

20. USING PUSHER TOOL (8) AND ARBOR PRESS,

INSTALL RING SPACER (9) AND PACKING RETAIN-

ER (10) INTO NO. 2 BEARING HOUSING (2).

Lightly lubricate seal contact side of ring

spacer (9) with lubricating oil. Install ring

spacer (9), with small diameter down, onto

bearing (7) inner race.

Lightly lubricate face seal of packing retainer

(10) with lubricating oil. Install packing retainer

(10) into No. 2 bearing housing (2) with car-

bon element facing down.

CAUTION

Press packing retainer (10) into No. 2

bearing housing (2) smoothly. Do not

shock packing retainer (10). Damage to

parts may result.

Use caution when using press. Improper

tools, or tools not properly aligned may

cause injury to personnel or damage to

parts or equipment.

Using seal installer tool (8) and arbor press,

press ring spacer (9) and packing retainer (10)

into No. 2 bearing housing (2).

Go on to Sheet 39

5-112

Change 6